═══ 1. Help for Sound Blaster ═══

Use the Sound Blaster window to select the number of Sound Blaster adapter 
cards you have installed in your system. 

For information about the items appearing in this window, select a topic from 
the list below: 

o Adapters Installed 
o OK 
o Cancel 


═══ 2. Help for Adapters Installed ═══

This field enables you to select the number of Sound Blaster cards that you 
have installed in the system. 

Use the spin button to set the correct number of Sound Blaster cards. 

The range is 0 to 4. The default is 1. 


═══ 3. Help for Adapters Installed ═══

This field enables you to select the specific Sound Blaster card that you have 
installed in the system. 

Use the drop down box to set specific Sound Blaster card. 

Possible values are: 

Sound Blaster (non Pro) 

Sound Blaster Pro (with OPL2) 

Sound Blaster Pro (with OPL3) 


═══ 4. Help for Adapters Installed ═══

Use the window to select the settings for each Sound Blaster adapter card you 
have installed in your system. 

For information about the items appearing in this window, select a topic from 
the list below: 

o Interrupt Level 
o DMA Channel 
o Port I/O Address 
o OK 
o Cancel 


═══ 5. Help for Adapters Installed ═══

This field enables you to select the interrupt level for a Sound Blaster card 
that you have installed in the system. 

This information can be determined by running the reference diskette on the 
Micro-Channel version (MCV), or by checking the dip switches on the ISA 
version. 

Use the spin button to set the correct interrupt level for this card. 

The range is 1 to 12.  The default is 7. 


═══ 6. Help for Adapters Installed ═══

This field enables you to select the DMA channel for a Sound Blaster card that 
you have installed in the system. 

This information can be determined by running the reference diskette on the 
Micro-Channel version (MCV), or by checking the dip switches on the ISA 
version. 

Use the spin button to set the correct interrupt level for this card. 

Possible values are 0, 1, or 3.  The default is 1. 


═══ 7. Help for Adapters Installed ═══

This field enables you to select the Port I/O address for a Sound Blaster card 
that you have installed in the system. 

This information can be determined by running the reference diskette on the 
Micro-Channel version (MCV), or by checking the dip switches on the ISA 
version. 

Use the spin button to set the correct interrupt level for this card. 

Possible values are 220 or 240.  The default is 220. 


═══ 8. Help for Cancel ═══

Select Cancel to close the Sound Blaster Installation window without saving the 
changes. 


═══ 9. Help for OK ═══

Select OK to close the Sound Blaster Installation window and save any changes. 


═══ 10. Help for Help ═══

Select Help to get help information about the current window. 


═══ 11. Help for Sound Blaster Keys ═══

The following keys can be used to control the Sound Blaster: 

Tab 
     Move among choices 

Alt 
     Switch to or from the Menu pull-down of an application window 

Arrow keys 
     Move among choices 

Enter 
     Select the default push button action 


═══ 12. Help for MMPM/2 CONFIG.SYS Error ═══

An error occurred while attempting to modify the CONFIG.SYS file.  DO NOT 
restart your system until the latest unmodified CONFIG.SYS file version is 
restored. 

As an aide in determining what the problem is, you might save the CONFIG.SYS as 
a renamed file and examine its contents for possible errors later.  If you 
cannot determine the cause of the problem, get help from someone knowledgeable 
about CONFIG.SYS files. 

To restore the latest unmodified file, rename it CONFIG.SYS. 

The latest file version can be identified by its name extension which is a 
three digit number.  The file having the highest extension number is the latest 
version.  For example, if your system contains files CONFIG.001, CONFIG.002, 
and CONFIG.003, the file with extension 003 is the latest version. 


═══ 13. Help for OK ═══

Select OK to indicate acknowledgement of the error situation and that the 
latest prior version of the CONFIG.SYS file must be restored before the system 
is restarted. 


═══ 14. Help for MME.INI Error ═══

An error occurred while attempting to modify the MMPM2.INI file. You can select 
OK to acknowledge that you are aware of the error situation and continue the 
installation process, or you can restart the installation process. 

If you continue the installation, your multimedia might not run properly due to 
the MMPM2.INI file error. 


═══ 15. Help for OK ═══

Select OK to acknowledge that you are aware of the error situation in the 
MMPM2.INI.